Joinery & Techniques

Dovetails, mortise-and-tenon and every joint in between.

Joinery & Techniques Intermediate

Epoxy and wood make stunning river tables and fills — if you choose the right resin and prepare properly. Here’s the…

3 min readOct 17, 2026

Joinery & Techniques Advanced

Heat and moisture turn stiff lumber into something you can bend by hand. Here’s how to steam bend without cracks and…

3 min readOct 17, 2026

Joinery & Techniques Intermediate

Box joints are strong, decorative and very achievable with one simple jig. Here’s how to build it and get gap-free…

3 min readOct 17, 2026

Joinery & Techniques Beginner

Carving needs only a knife, a block of basswood and a few safe cuts. Here’s how to start — and keep all ten fingers.

3 min readOct 17, 2026

Joinery & Techniques Intermediate

Turning is woodworking at speed. Learn the core cuts and one golden rule — ride the bevel — and the lathe stops…

3 min readOct 17, 2026

Joinery & Techniques Advanced

Tight hand-cut dovetails aren’t magic — they’re a sequence. Learn the tails-first method, the three habits that close…

5 min readOct 17, 2026

Joinery & Techniques Intermediate

Tables, chairs, doors and beds have relied on the mortise and tenon for thousands of years. Here’s how to cut one that…

3 min readOct 17, 2026

Joinery & Techniques Beginner

Choosing the right joint is half of good woodworking. Here are the 12 joints that matter, from quick pocket screws to…

3 min readOct 17, 2026